F5D8233-4 is a wireless router from Belkin, based on wireless N technology. Wireless N is faster than other three wireless standards (IEEE2802.11a, 802.11b, and 802.11g) but slower than 802.11ac. It supports the 802.11n wireless standard. Here let us check how to configure F5D8233-4 Belkin N WiFi Router using the setup disc. The below image shows how this device looks like. Dual Antennas helps to avoid interference and reduce the effect of noise.
Setup F5D8233-4 N Wireless Router Using Disc
How to Access Setup Page and Configure it
Update Firmware On Belkin F5D8233-4
Right after configuring F5D8233-4, we must ensure that the router is having the latest version of firmware. To check whether it is having the latest version of firmware and update it if it does not have the latest version, click the link below.
How to Update Firmware On Belkin WiFi Devices
Enable MAC Filtering On F5D8233-4
MAC address filtering is one method to prevent unauthorized devices from accessing the wireless network. To enable MAC address filtering on it, follow the instructions provided in the link below.
How to Enable MAC Address Filtering On Belkin Router
No Internet Access After Installing F5D8233-4
Rarely some users face troubles to access the Internet after installing this device in their network. If you face the same issues, visit the link below.
I Cannot Go Online After Installing Router
New Topics
Setup F5D8233-4 N Wireless Router Using Disc
- Connect the LAN port to the Ethernet Port of your computer
- Connect the Modem to the WAN port of F5D8233-4
Make sure that all devices are powered on now. First power on the modem and wait for 30 seconds and then power on the router. Check the diagram below to better understand the connection. - Run the setup CD on your computer
Now a setup wizard will come and click GO to run the wizard. - You need to confirm the operation and to do this click next.
- Now the Wizard will check the network settings and hardware settings.
- Enter the Wireless Network Name
In this step, we need to type the name of the wireless network. - Enter the Internet connection Username and Password
If your ISP (Internet Service Provider) gave you a username and password, you can enter it here. - Check Internet connectivity
After entering the Internet connection details it will check the connectivity. - Finish the setup
After successfully connected to the Internet your configuration wizard will end.
How to Access Setup Page and Configure it
Update Firmware On Belkin F5D8233-4
Right after configuring F5D8233-4, we must ensure that the router is having the latest version of firmware. To check whether it is having the latest version of firmware and update it if it does not have the latest version, click the link below.
How to Update Firmware On Belkin WiFi Devices
Enable MAC Filtering On F5D8233-4
MAC address filtering is one method to prevent unauthorized devices from accessing the wireless network. To enable MAC address filtering on it, follow the instructions provided in the link below.
How to Enable MAC Address Filtering On Belkin Router
No Internet Access After Installing F5D8233-4
Rarely some users face troubles to access the Internet after installing this device in their network. If you face the same issues, visit the link below.
I Cannot Go Online After Installing Router
New Topics