Configure D-Link Wireless Access Point DWL-G700AP by Setup Wizard

D-Link is one of the leading Wireless Access Point manufacturers and DWL-G700AP is one of its popular AP. In this article, you will learn the steps to configure the D-Link Wireless Access Point model DWL-G700AP in simple steps. Since Access Points do not have a DHCP server, before configuring the Access Point we need to assign a static IP address to your computer. After assigning a static IP address to your computer, connect DWL-G700AP Access Point to your computer using an Ethernet cable.


How to setup DWL-G700AP by Running-Wizard

To configure DWL-G700AP follow the steps below.

1. Assign static IP address on your computer
   
   If there is no other DHCP server connected to your computer you need to assign a static IP address to your computer. It should be in the range of 192.168.0.X
   
   Where X should be between 1 to 254 except 50. To learn how to assign a static IP address to your computer click the link below.
   Assign Static IP Address From Command Prompt
   
   
2. Connect your computer to D-Link Access Point
   
   You should connect the Wireless Access Point (DWL-G700AP) to your computer using an Ethernet cable and power on the Access Point.
   
   
3. Access the Configuration page
   
   To access the configuration page of D-link Access Point DWL-G700AP, open Internet Explorer or other browser and type 192.168.0.50 on the address bar. Press enter.
   
   Now it will prompt you to enter admin username and password to log on. Enter the following details.
   
   Default admin username: admin
   Default admin password :
   
   There is no default admin password.
   
   PS: The default Login IP address of D-Link DWL-G700AP Wireless Access Point is 192.168.0.50
   
   
4. Click on Run Wizard
   
   
   
   Now it will show the next steps in configuration. Click next.
   
   
   
5. Now the wizard will prompt you to set a new password for the Access Point. You need to confirm the Access Point password.
   
   
   After setting the password click next. Now onwards it is the login password of D-Link DWL-G700AP Wireless Access Point.
   
   
6. Enter the Wireless Network Name you want to extend
   
   You must tell D-Link DWL-G700AP Access Point the wireless network name of the network you want the device to extend. You must also specify the wireless channel too.
   
   
   After Selecting the SSID and wireless channel, click Next.
   
   
7. Now you need to select the Wireless encryption which matches the Wireless router. After selecting the encryption you need to enter the wireless key.
   
   
   Now click Next to continue.
   
   
8. Setup is completed on D-Link DWL-G700AP Access Point.
   
   
   
   Now you need to click on the Restart button. After restarting the Wireless Access Point you can use it on your network.

Other D-Link Product Configuration Guides

1. Configure DWL-G700AP in Client Mode
   
   To learn how to configure D-Link Wireless Access Point DWL-G700AP in Wireless Client mode instead of Access Point mode, visit the link below.
   How to connect D-Link DWL2100AP as Wireless Client
   
   
2. Configure D-Link Wireless Access Point DWL-G700AP in Repeater Mode
   
   Wireless Range Expander and Repeater have certain differences. To learn how to setup D-Link Wireless Access Point DWLG700AP in wireless repeater mode, click the link below.
   Configure D-Link DWL-2100 AP as Wireless Range Expander
   
   
3. Converting Access Point as Router
   
   You can easily convert D-Link AP DWL-G700AP into a wireless router with simple steps. To learn more about it, visit the link below.
   How to Convert D-Link AP into Wireless Router
   
   
4. Recover D-Link Access Point Login Password
   
   It is possible to forget your custom password created for D-Link DWL-G700AP. If you face such an issue, you can follow the instructions provided in the link below.
   How to Recover Forgotten D-Link Access Point Password
   

Home